One Boeing CH-47 Chinook, in 12mm or 1:144 scale.
Available in standard PLA or high resolution resin
2 different variants are available, American or British. The British version has some small additional features.
Some assembly is required. The wheels, rotors and engines need to be glued onto the two halves of the model. Note that the front and rear rotors and the left and right engines are not identical, refer to the pictures for the correct orientation.
The rotors may be held in place by 5mm diameter, 1 mm thick magnets (not supplied), or alternatively glued into position. The plastic inserts provided should be used if magnets are not used.
The Chinook is designed to be mounted on one of our flight stands. The mounting hole goes deep within the fuselage so that a magnet is not required. Due to the deep mounting hole, the taller flight stand is recommended: Tall Flight stand
The flight stand is not supplied with this model but is available separately.
Pictures shown are for 15mm PLA models
All models supplied unpainted, unbased and without crew (figures)
3D printed to order
