Back

ZPU AA guns (28mm)

  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
  •  - Click to enlarge
ZPU AA guns (28mm)

Tap for gallery

ZPU (Required)

£8.09


Product Information
Specification

One ZPU anti-aircraft gun in 28mm or 1:56 scale.

3 different variants are available:

ZPU-1
ZPU-2
ZPU-4

Please read the assembly instructions below:

ZPU-1.  This gun comes in 2 parts.  The barrel simply needs to be glued in position at your preferred angle

ZPU-2.  This gun comes in 4 parts.  The gun barrel part is a push fit into the body of the gun, it may be glued in position or left free to move.  The wheels are separate and must be glued in place.  The wheels can be placed in either the travelling or deployed position (pictures show the gun deployed, the mudguards should be uppermost in the travelling position).  Please note the picture of the two wheels, one has the support material removed and the other does not to show you what is and is not support.

ZPU-4.  This gun comes in 5 parts.  Take care removing the support material. The gun barrel parts should be glued together first.  Once glued together the gun barrels can be fitted into the body of the gun (note the correct orientation in the pictures).  Finally the upper part of the gun body should be glued in place to completely enclose the gun barrel parts.  It is recommended to glue the gun body onto the carriage as the spigot is quite short.

 

Due to the small size of these models pictures shown are for 28mm PLA models

Printed in high resolution resin

All models supplied unpainted, unbased and without crew (figures)

3D printed to order

Product CodeR28Lat175
ConditionNew

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.
Top

eCommerce by CubeCart